Custom Bent Aluminum Tube Display Project

Fixture used to showcase products at industry events

The Sharpe Team just finished a custom bent and fabricated  trade show display meant to hold motors. The display was bent out of 3" O.D. aluminum tubing (base arms) and also 1-1/2" O.D. aluminum tubing (top of display for signage). All the shaped base and arm plates are 3/8" thick aluminum. The complete display was then polished with a #4 satin finish. Our customer then put a diamond plate finish on the top of the  plates.

 

Custom Display
The taller back arms of this display were bent out of 1-1/2" O.D. aluminum tubing. The main arms that hold the aluminum plates were bent out of 3" O.D. aluminum tubing.

 

Custom Display
All aluminum plates and bent aluminum tubing were also fabricated together in Sharpe Products facilities.

 

 

Custom Display
Close up of the 3/8" thick aluminum plates that were fabricated to the bent tubing.

 

 

Custom Display
Customer then put a diamond plate type finish on the plates and installed their clients signage to complete the final look

 

Custom Display
Customer then put a diamond plate type finish on the plates and installed their clients signage to complete the final look.