Close

Assorted Handrail Connectors

Multi-Splice and Double Multi-Splice Lock Mechanical Connectors

Sharpe's multi-splice is the most versatile and easy to use splice lock on the market. Splice locks are used to connect and align railing sections. The multi-splice is supplied as a one piece assembly making it easier to handle and install compared to other two piece splices. Our multi-splice works with all the most common hand railing sizes including but not limited to 1-1/4" and 1-1/2" Schedule 40 pipe, and 1-1/2" O.D. 11 gage tube, and 1-1/2" O.D. 16 gage tube. (Fits all pipe and tube with an I.D. from 1.26" up to 1.61")

The single multi-splice can be used in expansion joints. The double multi-splice can be used for extra strength in non-expandable joints.

  • Available for Tube Sizes: 1-1/2" O.D. in 11 & 16 Gage
  • Available for Pipe Sizes: 1-1/4", 1-1/2" in Schedule 40
  • Steel Mechanical Connectors
  • Stainless Steel Mechanical Connectors (304 Alloy)

Welding Connectors

Welding connectors save on welding and grinding time by aligning the pipe and holding an 1/8" gap.

  • Available for Tube Sizes: 1-1/2" O.D. in 11 & 16 Gage
  • Available for Pipe Sizes: 1-1/4", 1-1/2",1", & 2" in Schedule 40
  • Steel Welding Connectors
  • Aluminum Welding Connectors (3003 Alloy)
  • Stainless Steel Welding Connectors (304 Alloy)

Dowels

Dowels are 3" in length and can be used at expansion joints in pipe rails by welding one end and using an epoxy glue on the other end. To create an expansion joint, weld only one end.

  • Tube Sizes Available: 1-1/2" O.D. in 16 Gage
  • Pipe Sizes Available: 1-1/4", 1-1/2" in Schedule 40 and 2" in Schedule 40
  • Steel Dowels
  • Aluminum Dowels (3003 Alloy)
  • Stainless Steel Dowels (304 Alloy)

Serrated Aluminum Dowels

Serrated aluminum dowels are 5" in length and are to be used with a structural adhesive to connect rails. To create an expansion joint, use adhesive on one end only.

  • Pipe Sizes Available: 1-1/4", 1 1/2" in Schedule 40
  • Aluminum Serrated Dowels (6063 Alloy)

Type T - Tee Cope Connector

Type T - Cope Connectors are used to create tee joints and cross joints in a handrail system.

  • Available for Pipe Sizes: 1-1/4" and 1-1/2"
  • Steel Type T - Tee Cope Connector
  • Aluminum Type T - Tee Cope Connector
  • Stainless Steel Type T - Tee Cope Connector

Type B - Beveled Tee Cope Connector

To make a beveled tee joint, 1 Type-B Beveled Tee Cope Connector is required. To make a beveled cross joint, 2 Type-B connectors are required. 

  • Available for Pipe Sizes: 1-1/4" and 1-1/2"
  • Steel Type B - Beveled Tee Cope Connector
  • Aluminum Type B - Beveled Tee Cope Connector
  • Stainless Steel Type B - Beveled Tee Cope Connector



Sharpe Products
2550 South 170th Street
New Berlin, WI 53151
262-754-0369 | Toll-free: 800-879-4418
Fax: 262-754-0374

© Sharpe Products | Terms and Conditions | Privacy policy | Site map

ISO 9001:2008 Registered